Araldite Standard 24ml (Syringe Dispenser)

Araldite Standard (Syringe Dispenser) Araldite Standard is a strong, solvent-free adhesive suitable for all materials, ideal for durable bonding and repairs. As it is in a syringe plunger, the plunger will disperse equal amounts of both components onto the surface. Perfect for complicated jobs which require adjustment thanks to a long working time. It bonds metal, wood, masonrry, ceramics, glass, dry concrete, chipboard, leather, cardboard, fabric, rubber and most plastics. When applying make sure the surfaces are clean and free from dust, corrosion, dirt and grease. For optimum bonding, slightly roughen the surfaces with sandpaper and degrease metals with a suitable solvent. During assembly, apply light pressure to the joint with tape or clamps until set around 8 hours. Allow 14 hours rest for the adhesive to fully gain strength before rough handling or sanding. This glue is solvent free and is perfect for joining metals where adustment may be necessary due to its long working time. Parts are repositionable within 80 minutes. Ensure the surfaces to be joined are clean and dry. Snap off the resealable cap from between the syringe plungers and break off the end seal. Depress the plunger to squeeze out equal amounts from both tubes, only squeeze out what you can use within 90 minutes as after this time it will dry hard. Join the surfaces and remove any excess glue before dry. When you join together apply light pressure to keep together (use tape) keep together for at least 8 hours, it can take up to 14 hours before completely set. This item will have to be sent via UK Mail Hazardous Materials & Liquids Only